Excavator w/ Demolition Jaws

Rasmussen Equipment proudly carries Genesis demolition attachment jaws that are built to make your project safer and more efficient. With the line-up of shear, concrete cracker and concrete pulverizing attachments, Genesis attachments will become a staple piece of equipment for any construction or demolition project.

The Genesis attachments unique pivot group configurations that stay with each jaw set provide maximum power at the piercing point when shearing or as the jaw starts to close when crushing concrete for optimal performance when and where you need it.

Uses of the Genesis attachments include construction and demolition sorting, concrete recycling, commercial demolition, concrete cracking and cutting rebar, pipe, steel and other scrap metal.

Makes & Models

Image
model
day
week
month
Image
Model
Shear - Genesis LXP 300 Jaw
Class: With 350x4 link-belt excavator
details
Day
NA
Week
NA
Month
$19,900
Excavator $9,400, Jaw $10,500, Monthly total $19,900

The LXP demolition shear jaw by Genesis Attachments is designed for general and bridge demolition, and structural steel, rebar, wire, aluminum and copper processing.
Each jaw set’s integrated, patented pivot group is configured to deliver the perfect power curve for it’s primary application. This provides maximum power at the piercing point when shearing.

Genesis LXP 300 Shear Jaw –
o Jaw opening – 22”
o Jaw depth – 24”
o Weight – 7,600 lbs

Paired with LinkBelt 350×4 excavator

Image
Model
Cracker - Genesis LXP 300
Class: With 350x4 link-belt excavator
details
Day
NA
Week
NA
Month
$19,900
Excavator $9,400, Jaw $10,500, Monthly total $19,900

Genesis LXP with Concrete Cracker jaw was designed for concrete recycling, c&D processing, demolition and rebar removal. Featuring a patented pivot system that provides a power cure to match the application, the LXP’s jaw tips concentrate force to more thoroughly crush heavy concrete.

Genesis LXP 300 Concrete Cracker
o Jaw opening – 43″
o Jaw depth – 30″
o Weight – 7,560

Paired with LinkBelt 350×4 excavator

Image
Model
Pulverizer - Genesis LXP 300
Class: With 350x4 link-belt excavator
details
Day
NA
Week
NA
Month
$19,900
Excavator $9,400, Jaw $10,500, Monthly total $19,900

The Genesis Attachements, LXP Pulverizer Jaw is designed for concrete processing, bridge demolition, rebar removal and secondary demolition projects. The patented pivot geometry creates peak power when the jaws are fully open, where it’s most needed to crush concrete.

Genesis LXP 300 Pulverizer
o Jaw Opening – 35″
o Jaw Depth – 26″
o Weight – 7,270lbs

Paired with LinkBelt 350×4 excavator

Image
Model
Shear - Genesis GTX665
Class: With 350x4 link-belt excavator
details
Day
NA
Week
NA
Month
$21,900
Excavator $9,400, Jaw $12,500, Monthly total $21,900

The Genesis GXT shear is the industry’s next generation shear designed to process scrap more efficiently. The Genesis XT shear is shorter in length and height and lighter is weight. Improved jaw geometry that makes it easier to pick up material and reduces wear from ground contact. Reverse-mounted hydraulic cylinder that shortens shear length and weight and protects rod from damage. The lower shear high improves visibility while providing superior rigidity and structural integrity.
Short primary cutting blades position apex closer to the rear of the jaws and draw material further into the jaws where higher force makes more efficient cuts.

Genesis GXT665 Shear
o Jaw Opening – 32″
o Jaw Depth – 32″
o Jaw Weight – 13,200

Paired with LinkBelt 350×4 excavator

* Rental Rates do not include Blade wear charge.
Rental Rates Based On
8 hours day
40 hours week
176 hour calendar month
ADDITIONAL USAGE WILL INCUR OVERTIME CHARGES
Double Shift Rate = Standard Rate X 1.75
Triple Shift Rate = Standard Rate X 2.50
Prices Subject to Change Without Notice
All Rentals Qualify for Equity Builder Program

Rental Terms & Conditions

  • All rentals are subject to credit approval.
  • Rental rates are based on a single shift 8 hour day, 40 hour week and 176 hour month.
  • Double shifts are at 1.75 the single rate, triple shifts are bill at 2.50 the single shift rate.
  • Customers are responsible for all consumables such as; fuel, lubricants, filters, ground engaging tools (teeth, cutting edges, breaker chisels, etc), tire wear.
  • Customer shall maintain the machine by performing the prescribed daily machine inspections and maintenance.
  • Customer is required to carry adequate Physical Damage and Liability Insurance listing Rasmussen Equipment Company as additional insured. Certificate of Insurance must be on file at Rasmussen Equipment Company.
  • Customer is expected to use the machine in safe manner. Customer shall provide qualified operators who are trained in proper operating procedures. The customer must also ensure that the machine’s safety features such as back-up alarms, ROPS, etc., remain in proper operating condition while in customers possession.
  • Customer is responsible for excessive wear or damage to machine such as broken glass, lights, bent or dented sheet metal, cylinders, tires, operation instruments, etc.
  • Rental rates do not include any applicable taxes or permits.
  • Customer responsible for all transportation charges. FOB Salt Lake City.
Contact a Representative

* Required